|
|
CHEVY
BLOWER KITS
(PICTURE
ABOVE:) 454 CHEVY 871 BLOWER KIT, 2V, POLISHED KIT - 8MM DRIVE
|
Chevy Blower
/ Supercharger Kits
- "MARINE (OFFSHORE)" |
Blower Kit Features:
 |
"MARINE (Offshore Pleasure and Power Boat Racing)" Applications: These Blower Kits include all the different stages of Blowers we offer including cast or billet rotors. The 671, 871, 1071, 1471, and 1671 Blowers are all designed for offshore boats. The kits listed below are priced with hard anodized Stage 2 Blowers. If Teflon is desired for your application, the part numbers and pricing for the Teflon blowers are shown as an add charge. The kits are priced this way to make certain you get the right blower for your application. If pleasure boating is your application, some non-Teflon blowers will be desired for consistency, while other applications will require 6 and 18 point Teflon stripping. The blowers can be run on either high octane pump gas or race gas. They are designed to run high endurance levels, with aggressive rpm changes and can handle 8,500 rpm and produce very consistent boost levels. The Teflon stripped blowers are high to medium maintenance blowers and depending on the overdrive speed, will need the Teflon stipping replaced periodically. |
|
Supercharger USA
Blowers are equipped with the best parts
and craftsmanship. Both front and rear
bearing plates have, high grade, double row bearings, (for
added rotor stability) and special designed rotor seals, which provides
excellent sealing. Our blowers are all hand assembled for
accurate internal clearances, and we Always use helical
rotors, cast or billet, to provide increased efficiency. |
|
Hard Anodized Interior Blower
|
|
Dual Billet USA Carb Adaptor Plate
|
|
Drive Snout and Gear Coupler
|
|
Idler Arm or Bracket
Kit
|
|
3" Idler Pulley
with aluminum stand |
|
8mm Blower
Pulleys (2) - wider variety of pulleys, and nicer looks than the
1/2" pitch old tooth profile.
|
|
8mm Blower Belt - superior rpm range and performance over the 1/2" pitch
profile
|
|
Accessory v-groove pulleys or serpentine pulley
|
|
Blower Intake Manifold
|
|
Complete Blower Kit Gasket set
|
|
Hardware
|
|
3 YEAR Manufacturer's
Warranty |
NOTE:
Kits are configured for aftermarket balancers, and short water pumps.
You can order the kit with a steel crank hub for an internal or external
balance crankshaft if desired. Prices for options are listed below
each section.
|
No V = No
water or alternator |
|
1V = Water
pump + alternator |
|
2V = Water
pump + alternator + power steering |
|
3V = Marine 3V |
|
SRP = Replaces
the V groove pulleys with a 6 rib serpentine pulley |
|
Chevy
Blower / Supercharger Kits - "MARINE (OFFSHORE)" |
|
|
PLEASE
CHOOSE THE BLOWER KIT (BELOW) - FOR YOUR APPLICATION
327,
350, 355, 383, 400, 406 Small Block (SBC) Chevy Blower Kits
396, 427, 454,
502, 509, 540 Big Block (BBC) 9.8" Standard Deck Chevy Blower Kits
454, 502, 509,
540, 572, 588 Big Block (BBC) 10.2" Tall Deck Chevy Blower Kits
|
|
327,
350, 355, 383, 400, 406 Chevy Blower / Supercharger Kits - "MARINE (OFFSHORE)"
Part
Number |
SBC
350 Small Block Chevy Blower Kits:
-
"MARINE (OFFSHORE)" |
Price |
|
|
|
|
|
|
Small
Block - Chevy 671
Blower Kits |
|
7087 |
350
Chevy 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,141.00 |
7088 |
350 Chevy 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$3,141.00 |
7089 |
350
Chevy 671 Blower Kit, 3V, Satin Finish - 8mm, H.A. |
$3,247.00 |
7090 |
350 Chevy 671 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$3,216.00 |
|
|
|
7095 |
350
Chevy 671 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,241.00 |
7096 |
350 Chevy 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,241.00 |
7097 |
350 Chevy 671 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,347.00 |
7098 |
350
Chevy 671 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,316.00 |
|
|
|
7103 |
350
Chevy 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,351.00 |
7104 |
350 Chevy 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$3,351.00 |
7105 |
350 Chevy 671 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$3,457.00 |
7106 |
350
Chevy 671 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$3,426.00 |
|
|
|
|
Small
Block - Chevy 871 Blower Kits |
|
7091 |
350
Chevy 871 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,391.00 |
7092 |
350 Chevy 871 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$3,391.00 |
7093 |
350
Chevy 871 Blower Kit, 3V, Satin Finish - 8mm, H.A. |
$3,497.00 |
7094 |
350 Chevy 871 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$3,466.00 |
|
|
|
7099 |
350
Chevy 871 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,591.00 |
7100 |
350 Chevy 871 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,591.00 |
7101 |
350 Chevy 871 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,697.00 |
7102 |
350
Chevy 871 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,666.00 |
|
|
|
7107 |
350
Chevy 871 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,701.00 |
7108 |
350 Chevy 871 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$3,701.00 |
7109 |
350 Chevy 871 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$3,807.00 |
7110 |
350
Chevy 871 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$3,776.00 |
|
|
|
| Back
to Top |
|
|
396,
427, 454, 502, 509, 540 Chevy Blower / Supercharger Kits - "MARINE (OFFSHORE)"
Part
Number |
BBC
9.8" Std. Deck, 454 Chevy Blower Kits:
-
"MARINE (OFFSHORE)" |
Price |
|
|
|
|
|
Big
Block 9.8" Std. Deck - Chevy 671 Blower Kits |
|
7135 |
454 Chevy 671 Blower Kit, 1V, Satin Finish - 8mm,
H.A. |
$3,141.00 |
7136 |
454 Chevy 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$3,141.00 |
7137 |
454 Chevy 671 Blower Kit, 3V, Satin Finish - 8mm,
H.A. |
$3,147.00 |
7138 |
454 Chevy 671 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$3,216.00 |
|
|
|
7143 |
454 Chevy 671 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,241.00 |
7144 |
454 Chevy 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,241.00 |
7145 |
454 Chevy 671 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,347.00 |
7146 |
454 Chevy 671 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,316.00 |
|
|
|
7151 |
454 Chevy 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,351.00 |
7152 |
454 Chevy 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$3,351.00 |
7153 |
454 Chevy 671 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$3,457.00 |
7154 |
454 Chevy 671 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$3,426.00 |
|
|
|
|
Big
Block 9.8" Std. Deck - Chevy 871 Blower Kits |
|
7139 |
454 Chevy 871 Blower Kit, 1V, Satin Finish - 8mm,
H.A. |
$3,391.00 |
7140 |
454 Chevy 871 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$3,391.00 |
7141 |
454 Chevy 871 Blower Kit, 3V, Satin Finish - 8mm,
H.A. |
$3,497.00 |
7142 |
454 Chevy 871 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$3,466.00 |
|
|
|
7147 |
454 Chevy 871 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,591.00 |
7148 |
454 Chevy 871 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,591.00 |
7149 |
454 Chevy 871 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,697.00 |
7150 |
454 Chevy 871 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,666.00 |
|
|
|
7155 |
454 Chevy 871 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,701.00 |
7156 |
454 Chevy 871 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$3,701.00 |
7157 |
454 Chevy 871 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$3,807.00 |
7158 |
454 Chevy 871 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$3,776.00 |
|
|
|
|
Big
Block 9.8" Std. Deck - Chevy 1071 Blower Kits |
|
7142-1 |
454
Chevy 1071 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$4,430.00 |
7142-2 |
454 Chevy 1071 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$4,430.00 |
7142-3 |
454
Chevy 1071 Blower Kit, 3V, Satin Finish - 8mm, H.A. |
$4,535.00 |
7142-4 |
454 Chevy 1071 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$4,505.00 |
|
|
|
7150-1 |
454
Chevy 1071 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,630.00 |
7150-2 |
454 Chevy 1071 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,630.00 |
7150-3 |
454 Chevy 1071 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,735.00 |
7150-4 |
454
Chevy 1071 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,705.00 |
|
|
|
7158-1 |
454
Chevy 1071 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,740.00 |
7158-2 |
454 Chevy 1071 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$4,740.00 |
7158-3 |
454 Chevy 1071 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$4,845.00 |
7158-4 |
454
Chevy 1071 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$4,815.00 |
|
|
|
|
Big
Block 9.8" Std. Deck - Chevy 1471 Blower Kits |
|
7142-5 |
454
Chevy 1471 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$4,600.00 |
7142-6 |
454 Chevy 1471 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$4,600.00 |
7142-7 |
454
Chevy 1471 Blower Kit, 3V, Satin Finish - 8mm, H.A. |
$4,707.00 |
7142-8 |
454 Chevy 1471 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$4,675.00 |
|
|
|
7150-5 |
454
Chevy 1471 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,800.00 |
7150-6 |
454 Chevy 1471 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,800.00 |
7150-7 |
454 Chevy 1471 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,907.00 |
7150-8 |
454
Chevy 1471 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,875.00 |
|
|
|
7158-5 |
454
Chevy 1471 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,910.00 |
7158-6 |
454 Chevy 1471 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$4,910.00 |
7158-7 |
454 Chevy 1471 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$5,017.00 |
7158-8 |
454
Chevy 1471 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$4,985.00 |
|
|
|
| Back
to Top |
|
|
454, 502, 509, 540,
572, 588 Chevy Blower / Supercharger Kits - "MARINE (OFFSHORE)"
Part
Number |
BBC
10.2" TALL
DECK, 454 Chevy Blower Kits:
-
"MARINE (OFFSHORE)" |
Price |
|
|
|
|
|
Big
Block 10.2" Tall Deck - Chevy 671 Blower Kits |
|
7195 |
454 Chevy 671 Blower Kit, 1V, Satin Finish - 8mm,
H.A. |
$3,111.00 |
7196 |
454 Chevy 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$3,111.00 |
7197 |
454 Chevy 671 Blower Kit, 3V, Satin Finish - 8mm,
H.A. |
$3,220.00 |
7198 |
454 Chevy 671 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$3,186.00 |
|
|
|
7207 |
454 Chevy 671 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,311.00 |
7208 |
454 Chevy 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,311.00 |
7209 |
454 Chevy 671 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,420.00 |
7210 |
454 Chevy 671 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,386.00 |
|
|
|
7219 |
454 Chevy 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,421.00 |
7220 |
454 Chevy 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$3,421.00 |
7221 |
454 Chevy 671 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$3,530.00 |
7222 |
454 Chevy 671 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$3,496.00 |
|
|
|
|
Big
Block 10.2" Tall Deck - Chevy 871 Blower Kits |
|
7199 |
454 Chevy 871 Blower Kit, 1V, Satin Finish - 8mm,
H.A. |
$3,461.00 |
7200 |
454 Chevy 871 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$3,461.00 |
7201 |
454 Chevy 871 Blower Kit, 3V, Satin Finish - 8mm,
H.A. |
$3,567.00 |
7202 |
454 Chevy 871 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$3,536.00 |
|
|
|
7211 |
454 Chevy 871 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,661.00 |
7212 |
454 Chevy 871 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,661.00 |
7213 |
454 Chevy 871 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,767.00 |
7214 |
454 Chevy 871 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,736.00 |
|
|
|
7223 |
454 Chevy 871 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,771.00 |
7224 |
454 Chevy 871 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$3,771.00 |
7225 |
454 Chevy 871 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$3,877.00 |
7226 |
454 Chevy 871 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$3,846.00 |
|
|
|
|
Big
Block 10.2" Tall Deck - Chevy 1071 Blower Kits |
|
7203 |
454
Chevy 1071 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$4,498.00 |
7204 |
454 Chevy 1071 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$4,498.00 |
7205 |
454
Chevy 1071 Blower Kit, 3V, Satin Finish - 8mm, H.A. |
$4,693.00 |
7206 |
454 Chevy 1071 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$4,573.00 |
|
|
|
7215 |
454
Chevy 1071 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,698.00 |
7216 |
454 Chevy 1071 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,698.00 |
7217 |
454 Chevy 1071 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,803.00 |
7217 |
454
Chevy 1071 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,773.00 |
|
|
|
7227 |
454
Chevy 1071 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,808.00 |
7228 |
454 Chevy 1071 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$4,808.00 |
7229 |
454 Chevy 1071 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$4,913.00 |
7230 |
454
Chevy 1071 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$4,883.00 |
|
|
|
|
Big
Block 10.2" Tall Deck - Chevy 1471 Blower Kits |
|
7206-5 |
454
Chevy 1471 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$4,670.00 |
7206-6 |
454 Chevy 1471 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$4,670.00 |
7206-7 |
454
Chevy 1471 Blower Kit, 3V, Satin Finish - 8mm, H.A. |
$4,777.00 |
7206-8 |
454 Chevy 1471 Blower Kit, SRP, Satin Finish - 8mm, H.A. |
$4,745.00 |
|
|
|
7218-5 |
454
Chevy 1471 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,870.00 |
7218-6 |
454 Chevy 1471 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,870.00 |
7218-7 |
454 Chevy 1471 Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,977.00 |
7218-8 |
454
Chevy 1471 Blower Kit, SRP, Polished Kit - with Satin Manifold -
8mm, H.A. |
$4,945.00 |
|
|
|
7230-5 |
454
Chevy 1471 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,980.00 |
7230-6 |
454 Chevy 1471 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$4,980.00 |
7230-7 |
454 Chevy 1471 Blower Kit, 3V, Complete Polished Kit - 8mm, H.A. |
$5,087.00 |
7230-8 |
454
Chevy 1471 Blower Kit, SRP, Complete Polished Kit - 8mm,
H.A. |
$5,055.00 |
|
|
|
| Back
to Top |
|
|
SUPERCHARGER
USA
(714)
578-8200
If you
have any questions, please feel free to contact us by phone or email
us, and Supercharger USA will be happy to assist you with forced
induction technology!
|
|
