|
|
CHRYSLER
BLOWER KITS
(PICTURE
ABOVE:) 454 CHEVY 871 BLOWER KIT, 2V, POLISHED KIT - 8MM DRIVE
|
Chrysler Blower
/ Supercharger Kits
- "DRAG RACING" |
|
Blower Kit Features:
 |
"DRAG
RACING" Applications: These Blower Kits include
all the different stages of Blowers we offer including cast and billet rotors. Theses 671, 871, 1071,
and 1471 Blowers are designed for Drag Racing.The kits listed below are priced with hard anodized stage 2 blowers. If Teflon is desired for your application, the part numbers and pricing for the Teflon blowers are shown as an add charge. The kits are priced this way to make certain you get the right blower for your application. If drag racing is your application, some non-Teflon blowers will be desired for consistency, while other applications will require 6 and 18 Point teflon stripping. The blowers can be run on race gas, Alcohol and Nitro. They are designed to run up to 11,000 rpm and produce very high boost levels. The Teflon stripped blowers are high to medium maintenance blowers and depending on the overdrive speed, will need the Teflon stripping replaced periodically.
|
|
Supercharger USA
Blowers are equipped with the best parts
and craftsmanship. Both front and rear
bearing plates have, high grade, double row bearings, (for
added rotor stability) and special designed rotor seals, which provides
excellent sealing. Our blowers are all hand assembled for
accurate internal clearances, and we always use helical
rotors, to provide increased efficiency. Complete Blower Kit Components are listed below: |
|
Hard Anodized interior blower
|
|
Dual Billet USA Carb Adaptor Plate
|
|
Drive Snout and Gear Coupler
|
|
Idler Arm or Bracket Kit |
|
3" Idler Pulley
with aluminum stand
|
|
8mm Blower
Pulleys (2) - wider variety of pulleys to choose from and nicer look than the
1/2" pitch profile.
|
|
8mm Blower Belt - superior rpm range and performance over the 1/2" pitch
profile
|
|
Accessory V-groove pulleys or serpentine pulley
|
|
Blower Intake Manifold
|
|
Complete Blower Kit Gasket set
|
|
Hardware |
|
3
YEAR Manufacturer's Warranty |
|
No
V = No water or alternator |
|
1V
= Water pump + alternator |
|
Chrysler
Blower / Supercharger Kits - "DRAG
RACING" |
|
|
PLEASE
CHOOSE THE BLOWER KIT (BELOW) - FOR YOUR APPLICATION
273, 1965 & Under, Chrysler Blower Kits
273-318, 1966 & up, Chrylser Blower Kits
330-392 Hemi Chrysler Blower Kits
330-392 Hemi (Hot Heads Manifold) Chrylser Blower Kits
340-360 Chrysler Blower Kits
383-400 Chrysler Blower Kits
426 Hemi Chrysler Blower Kits
440
Chrysler Blower Kits
NOTE: Some
Chrysler Motors may require an "External Balance"
Aftermarket Steel Harmonic Balancer.
CHRYSLER Kits MUST
REPLACE: Stock Balancer with "STEEL CRANK
HUB" or "AFTERMARKET STEEL BALANCER"
|
|
273, 1965 & Under, Chrysler Blower / Supercharger Kits - "DRAG RACING "
Part
Number |
273
Chrysler Blower Kits: -
"DRAG RACING" |
Price |
| |
|
|
7263-0V |
273 Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,894.00 |
7263 |
273 Chrysler 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,894.00 |
|
|
|
7266-0V |
273 Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$4,094.00 |
7266 |
273
Chrysler 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,094.00 |
|
|
|
7269-0V |
273
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$4,489.00 |
7269 |
273
Chrysler 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,489.00 |
| |
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
| |
|
|
| Back
to Top |
|
|
273-318, 1966 & up, Chrysler Blower / Supercharger Kits - "DRAG RACING"
Part
Number |
273-318
Chrysler Blower Kits: -
"DRAG RACING" |
Price |
| |
|
|
7281-0V |
273-318 Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,894.00 |
7281 |
273-318 Chrysler 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. |
$3,894.00 |
|
|
|
7284-0V |
273-318 Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$4,094.00 |
7284 |
273-318
Chrysler 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,094.00 |
|
|
|
7287-0V |
273-318
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$4,489.00 |
7287 |
273-318
Chrysler 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. |
$4,489.00 |
| |
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
| |
|
|
| Back
to Top |
|
|
330-392 Hemi Chrysler Blower / Supercharger Kits - "DRAG RACING"
Part
Number |
330-392 Hemi
Chrysler Blower Kits: -
"DRAG RACING" |
Price |
| |
|
|
7299-0V |
330-392 Hemi Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,105.00 |
7299 |
330-392 Hemi Chrysler 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,105.00 |
|
|
|
7302-0V |
330-392 Hemi Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$3,305.00 |
7302 |
330-392 Hemi
Chrysler 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,305.00 |
|
|
|
7305-0V |
330-392 Hemi
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$3,515.00 |
7305 |
330-392 Hemi
Chrysler 671 Blower Kit,1V, Complete Polished Kit - 8mm, H.A. |
$3,519.00 |
| |
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
ADD-4450 |
Machine
O-Ring 3/16" Groove into, Intake Manifold Top Surface |
$
96.00 |
| |
|
|
| Back
to Top |
|
|
330-392 Hemi (Hot Heads Manifold)
Chrysler Blower / Supercharger Kits - "DRAG RACING"
Part
Number |
330-392 Hemi
Chrysler Blower Kits: -
"DRAG RACING" |
Price |
| |
|
|
7317-0V |
330-392 Hemi Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,181.00 |
7317 |
330-392 Hemi Chrysler 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,181.00 |
|
|
|
7320-0V |
330-392 Hemi Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$3,381.00 |
7320 |
330-392 Hemi
Chrysler 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,381.00 |
|
|
|
7323-0V |
330-392 Hemi
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$3,786.00 |
7323 |
330-392 Hemi
Chrysler 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,786.00 |
| |
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
ADD-4450 |
Machine
O-Ring 3/16" Groove into, Intake Manifold Top Surface |
$
96.00 |
| |
|
|
| Back
to Top |
|
|
340-360
Chrysler Blower / Supercharger Kits - "DRAG RACING"
Part
Number |
340-360
Chrysler Blower Kits: -
"DRAG RACING" |
Price |
| |
|
|
7336-0V |
330-360 Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,894.00 |
7336 |
330-360 Chrysler 671 Blower Kit,12V, Satin Finish - 8mm, H.A. |
$3,894.00 |
|
|
|
7339-0V |
330-360 Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$4,094.00 |
7339 |
330-360
Chrysler 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,094.00 |
|
|
|
7342-0V |
330-360
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$4,489.00 |
7342 |
330-360
Chrysler 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,489.00 |
| |
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
| |
|
|
| Back
to Top |
|
|
383-400
Chrysler Blower / Supercharger Kits - "DRAG RACING"
Part
Number |
383-400
Chrysler Blower Kits: -
"DRAG RACING" |
Price |
| |
|
|
7354-0V |
383-400 Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,867.00 |
7354 |
383-400 Chrysler 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,687.00 |
|
|
|
7357-0V |
383-400 Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$4,047.00 |
7357 |
383-400
Chrysler 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$4,047.00 |
|
|
|
7360-0V |
383-400
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$4,442.00 |
7360 |
383-400
Chrysler 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,442.00 |
| |
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
| |
|
|
| Back
to Top |
|
|
426 Hemi
Chrysler Blower / Supercharger Kits - "DRAG RACING"
Part
Number |
426 Hemi
Chrysler Blower Kits: -
"DRAG RACING" |
Price |
|
|
|
|
Chrysler 671 Blower Kits |
|
7381-0V |
426 Hemi
Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,325.00 |
7381 |
426 Hemi
Chrysler 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,325.00 |
|
|
|
7387-0V |
426 Hemi
Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$3,525.00 |
7387 |
426 Hemi
Chrysler 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,525.00 |
|
|
|
7393-0V |
426 Hemi
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$3,635.00 |
7393 |
426 Hemi
Chrysler 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,635.00 |
|
|
|
|
Chrysler 871 Blower Kits |
|
7384-0V |
426 Hemi
Chrysler 871 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,705.00 |
7384 |
426 Hemi
Chrysler 871 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,705.00 |
|
|
|
7390-0V |
426 Hemi
Chrysler 871 Blower Kit, No V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,905.00 |
7390 |
426 Hemi
Chrysler 871 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,905.00 |
|
|
|
7396-0V |
426 Hemi
Chrysler 871 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$4,015.00 |
7396 |
426 Hemi
Chrysler 871 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$4,015.00 |
|
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
ADD-4450 |
Machine
O-Ring 3/16" Groove into, Intake Manifold Top Surface |
$
96.00 |
| |
|
|
| Back
to Top |
|
|
440
Chrysler Blower / Supercharger Kits - "DRAG RACING"
Part
Number |
440
Chrysler Blower Kits:
-
"DRAG RACING" |
Price |
|
|
|
|
|
|
Chrysler 671
Blower Kits |
|
7417-0V |
440
Chrysler 671 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,295.00 |
7417 |
440
Chrysler
671
Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,295.00 |
|
|
|
|
7423-0V |
440
Chrysler 671 Blower Kit, No V, Polished Kit - with Satin
Manifold - 8mm, H.A. |
$3,495.00 |
7423 |
440
Chrysler
671
Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,495.00 |
|
|
|
|
7429-0V |
440
Chrysler 671 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$3,605.00 |
7429 |
440
Chrysler
671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,605.00 |
|
|
|
|
|
Chrysler
871
Blower Kits |
|
7420-0V |
440
Chrysler 871 Blower Kit, No V, Satin Finish - 8mm, H.A. |
$3,675.00 |
7420 |
440
Chrysler
871 Blower Kit, 1V, Satin Finish - 8mm, H.A. |
$3,675.00 |
|
|
|
|
7426-0V |
440
Chrysler 871 Blower Kit, No V, Polished Kit - with Satin Manifold -
8mm, H.A. |
$3,875.00 |
7426 |
440
Chrysler
871
Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. |
$3,875.00 |
|
|
|
|
7432-0V |
440
Chrysler 871 Blower Kit, No V, Complete Polished Kit - 8mm, H.A. |
$3,985.00 |
7432 |
440
Chrysler
871
Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. |
$3,985.00 |
|
|
|
ADD-6-TEF |
Add 6 Point Teflon Strips |
$ 135.00 |
ADD-18-TEF |
Add 18 Point Teflon Strips |
$
360.00 |
ADD-4450 |
Machine
O-Ring 3/16" Groove into, Intake Manifold Top Surface |
$
96.00 |
| |
|
|
| Back
to Top |
|
|
SUPERCHARGER
USA
(714)
578-8200
If you
have any questions, please feel free to contact us by phone or email
us, and Supercharger USA will be happy to assist you with forced
induction technology!
|
|
|
|
