3 YEAR WARRANTY  *Provided with all  Supercharger USA Complete Blower Kits* 

*Click on the "WARRANTY" (Button) above for Details*

 

 

*

Click on the Links Below to browse a wide variety of blower kit applications you desire. 

 

FORD BLOWER KIT APPLICATIONS:
*
STREET & SHOW KITS
*
STREET & STRIP KITS
*
MARINE KITS
*
DRAG RACING KITS
*
BACK TO TOP OF PAGE
 

 

BACK TO CATALOG

FORD BLOWER KITS

(PICTURE ABOVE:) 454 CHEVY 871 BLOWER KIT, 2V, POLISHED KIT - 8MM DRIVE

Ford Blower / Supercharger Kits - "DRAG RACING " 

Ford

Blower Kit Features:

"DRAG RACING" Applications: These Blower Kits include all the different stages of Blowers we offer including cast and billet rotors. Theses 671, 871, 1071, and 1471 Blowers are designed for Drag Racing.The kits listed below are priced with hard anodized stage 2 blowers. If Teflon is desired for your application, the part numbers and pricing for the Teflon blowers are shown as an add charge. The kits are priced this way to make certain you get the right blower for your application. If drag racing is your application, some non-Teflon blowers will be desired for consistency, while other applications will require 6 and 18 Point teflon stripping. The blowers can be run on race gas, Alcohol and Nitro. They are designed to run up to 11,000 rpm and produce very high boost levels. The Teflon stripped blowers are high to medium maintenance blowers and depending on the overdrive speed, will need the Teflon stripping replaced periodically.

Supercharger USA Blowers are equipped with the best parts and craftsmanship.  Both front and rear bearing plates have, high grade, double row bearings, (for added rotor stability) and special designed rotor seals, which provides excellent sealing.  Our blowers are all hand assembled for accurate internal clearances, and we always use helical rotors, to provide increased efficiency. Complete Blower Kit Components are listed below:

Hard Anodized interior blower

Dual Billet USA Carb Adaptor Plate  

Drive Snout and Gear Coupler

Idler Arm or Bracket Kit

3" Idler Pulley with aluminum stand

8mm Blower Pulleys (2) - wider variety of pulleys to choose from and nicer look than the 1/2" pitch profile.

8mm Blower Belt - superior rpm range and performance over the 1/2" pitch profile

Accessory V-groove pulleys or serpentine pulley

Blower Intake Manifold

Complete Blower Kit Gasket set

Hardware

3 YEAR Manufacturer's Warranty

NOTE:  Kits are configured for aftermarket balancers, and short water pumps.  You can order the kit with a steel crank hub for an internal or external balance crankshaft if desired.  Prices for options are listed below each section.

    No V = No water or alternator
    1V = Water pump + alternator

 

Ford Blower / Supercharger Kits  -  "DRAG RACING " 

 

PLEASE CHOOSE THE BLOWER KIT (BELOW) - FOR YOUR APPLICATION

 

289-302 Ford Blower Kits

351Cleveland 4V or 2V Ford Blower Kits

351 Windsor pre 75' or 75 & later Ford Blower Kits

400M Ford Blower Kits

390-428 Ford Blower Kits

429-460 Ford Blower Kits

429 Boss Ford Blower Kits

 

 

 

Ford

 

Ford 289-302 Blower / Supercharger Kits - "DRAG RACING"

Part Number

Ford 289-302 Blower Kits:  -  "DRAG RACING" 

Price

7445-0V
Ford 289-302 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,865.00
7445
Ford 289-302 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,865.00

 

7448-0V
Ford 289-302 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A.   $4,065.00
7448
Ford 289-302 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,065.00

 

7451-0V
Ford 289-302 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,460.00
7451
Ford 289-302 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,460.00
 
ADD-6-TEF
Add 6 Point Teflon Strips $  135.00
ADD-18-TEF
Add 18 Point Teflon Strips $   360.00
Back to Top

351 Cleveland 4V or 2V Ford Blower / Supercharger Kits - "DRAG RACING"

Part Number

351 Cleveland 4V or 2V Blower Kits:  -  "DRAG RACING" 

Price

7463-0V
Ford 351C 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,944.00
7463
Ford 351C 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,944.00

 

7466-0V
Ford 351C 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A.   $4,144.00
7466
Ford 351C 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,144.00

 

7469-0V
Ford 351C 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,539.00
7469
Ford 351C 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,539.00
 
ADD-6-TEF
Add 6 Point Teflon Strips $  135.00
ADD-18-TEF
Add 18 Point Teflon Strips $   360.00
Back to Top

351 Windsor pre 75' or 75' & later Ford Blower / Supercharger Kits - "DRAG RACING"

Part Number

351 Windsor pre 75' or 75' & later Blower Kits:  -  "DRAG RACING" 

Price

7481-0V
Ford 351W 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,998.00
7481
Ford 351W 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,998.00

 

7484-0V
Ford 351W 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A.   $4,198.00
7484
Ford 351W 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,198.00

 

7487-0V
Ford 351W 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,593.00
7487
Ford 351W 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,593.00
 
ADD-6-TEF
Add 6 Point Teflon Strips $  135.00
ADD-18-TEF
Add 18 Point Teflon Strips $   360.00
Back to Top

400M Ford Blower / Supercharger Kits - "DRAG RACING"

Part Number
400M Blower Kits:  -  "DRAG RACING"  Price
   
7499-0V
Ford 400M 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,914.00
7499
Ford 400M 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,914.00

 

7502-0V
Ford 400M 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,114.00
7502
Ford 400M 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,114.00

 

7505-0V
Ford 400M 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,512.00
7505
Ford 400M 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,512.00
 
ADD-6-TEF
Add 6 Point Teflon Strips $  135.00
ADD-18-TEF
Add 18 Point Teflon Strips $   360.00
Back to Top

390-428 Ford Blower / Supercharger Kits - "DRAG RACING"

Part Number
390-428 Blower Kits:  -  "DRAG RACING"  Price
390 - 428 Ford 671 Blower Kits
 
7526-0V
Ford 390-428 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,847.00
7526
Ford 390-428 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,847.00

 

7532-0V
Ford 390-428 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,047.00
7532
Ford 390-428 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,047.00

 

7538-0V
Ford 390-428 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,292.00
7538
Ford 390-428 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,292.00
390-428 Ford 871 Blower Kits
7529-0V
Ford 390-428 871 Blower Kit, 1V, Satin Finish - 8mm, H.A. $4,227.00
7529
Ford 390-428 871 Blower Kit, 2V, Satin Finish - 8mm, H.A. $4,227.00

 

7535-0V
Ford 390-428 871 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A.   $4,427.00
7535
Ford 390-428 871 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,427.00

 

7541-0V
Ford 390-428 871 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,672.00
7541
Ford 390-428 871 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,672.00
     
ADD-6-TEF
Add 6 Point Teflon Strips $  135.00
ADD-18-TEF
Add 18 Point Teflon Strips $   360.00
ADD-4450
Machine O-Ring 3/16" Groove into,  Intake Manifold Top Surface $     96.00
Back to Top    

429-460 Ford Blower / Supercharger Kits - "DRAG RACING"

Part Number
429-460 Blower Kits:  -  "DRAG RACING"  Price
429-460 Ford 671 Blower Kits
 
7562-0V
Ford 429-460 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,606.00
7562
Ford 429-460 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,606.00

 

7568-0V
Ford 429-460 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. $3,806.00
7568
Ford 429-460 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $3,806.00

 

7574-0V
Ford 429-460 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,256.00
7574
Ford 429-460 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,256.00
429-460 Ford 871 Blower Kits
7565-0V
Ford 429-460 871 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,966.00
7565
Ford 429-460 871 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,966.00

 

7571-0V
Ford 429-460 871 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,166.00
7571
Ford 429-460 871 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,166.00

 

7577-0V
Ford 429-460 871 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,616.00
7577
Ford 429-460 871 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,616.00
     
ADD-6-TEF
Add 6 Point Teflon Strips $  135.00
ADD-18-TEF
Add 18 Point Teflon Strips $   360.00
ADD-4450
Machine O-Ring 3/16" Groove into,  Intake Manifold Top Surface $     96.00
Back to Top    

429 Boss Ford Blower / Supercharger Kits - "DRAG RACING"

Part Number
429 Boss Blower Kits:  -  "DRAG RACING"  Price
429 Boss Ford 671 Blower Kits
 
7598-0V
Ford 429 Boss 671 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,551.00
7598
Ford 429 Boss 671 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,551.00

 

7604-0V
Ford 429 Boss 671 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm , H.A. $3,751.00
7604
Ford 429 Boss 671 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $3,751.00

 

7610-0V
Ford 429 Boss 671 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $3,926.00
7610
Ford 429 Boss 671 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $3,926.00
429 Boss Ford 871 Blower Kits
7601-0V
Ford 429 Boss 871 Blower Kit, 1V, Satin Finish - 8mm, H.A. $3,931.00
7601
Ford 429 Boss 871 Blower Kit, 2V, Satin Finish - 8mm, H.A. $3,931.00

 

7607-0V
Ford 429 Boss 871 Blower Kit, 1V, Polished Kit - with Satin Manifold - 8mm , H.A. $4,131.00
7607
Ford 429 Boss 871 Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm, H.A. $4,131.00

 

7613-0V
Ford 429 Boss 871 Blower Kit, 1V, Complete Polished Kit - 8mm, H.A. $4,306.00
7613
Ford 429 Boss 871 Blower Kit, 2V, Complete Polished Kit - 8mm, H.A. $4,306.00
     
ADD-6-TEF
Add 6 Point Teflon Strips $  135.00
ADD-18-TEF
Add 18 Point Teflon Strips $   360.00
ADD-4450
Machine O-Ring 3/16" Groove into,  Intake Manifold Top Surface $     96.00
Back to Top    

 

SUPERCHARGER  USA

 

If you have any questions, please feel free to contact us by phone or email us, and Supercharger USA will be happy to assist you with forced induction technology!