|
|
PONTIAC
BLOWER KITS
(PICTURE
ABOVE:) 454 CHEVY 871 BLOWER KIT, 2V, POLISHED KIT - 8MM DRIVE
|
Pontiac
Blower
/ Supercharger Kits
- "STREET & SHOW" |


Blower Kit Features:
 |
"STREET
& SHOW Applications: These Blower Kits include
our "Standard" or Stage1 Blowers. The 671, 871, 1071,
and 1471 Blowers / Superchargers are designed for Street & Show vehicles, plus an occasional trip to the
track. These blowers do not have a hard anodized interior
nor any teflon stripping. They are designed to run up to 6500 rpm and produce very good boost
levels for these applications. This style blower is low
maintenance.
|
 |
Supercharger USA
Blowers are equipped with the best parts
and craftsmanship. Both front and rear
bearing plates have, high grade, double row bearings, (for
added stability) and special designed rotor seals, which provides
excellent sealing. Our blowers are all hand assembled for
accurate internal clearances, and we always use helical
rotors to provide increased efficiency.
Complete Blowers Kit
Components, are listed below:
|
 |
Standard Blower |
 |
Dual Billet USA Carb Adaptor Plate |
 |
Drive Snout and Gear Coupler |
 |
Idler
Arm or Bracket Kit with hardware |
 |
3"
Idler Pulley with aluminum stand |
 |
8mm
Blower Pulleys (2) - wider variety of pulleys, and nicer
looks than the 1/2" pitch profile. |
 |
8mm
Blower Belt - superior rpm range and performance over the
1/2" pitch profile |
 |
Accessory v-groove pulleys or serpentine pulley |
 |
Blower Intake Manifold, backfire valve and waterneck included |
 |
Complete Blower Kit Gasket set |
 |
Hardware |
 |
3
YEAR Manufacturer's Warranty |
 |
No
V = No water or alternator |
 |
1V
= Water pump + alternator |
 |
2V
= Water pump + alternator + power steering |
 |
3V
= Water pump + alternator + power steering + air conditioning |
 |
SRP
= Replaces the V groove pulleys with a 6 rib serpentine pulley (If
Applicable) |
|
Pontiac
Blower / Supercharger Kits - "STREET
& SHOW" |
|
|
PLEASE
CHOOSE THE BLOWER KIT (BELOW) - FOR YOUR APPLICATION
400
- 455 Pontiac Blower Kits
NOTE: Some
Pontiac Bottom Drive Kit Applications, may require the use of the
Original Stock, Accessory V-Groove Pulley.
PONTIAC Kits MUST
REPLACE: Stock Balancer with "STEEL CRANK
HUB" or "AFTERMARKET STEEL BALANCER" |
|

400
- 455 Pontiac Blower / Supercharger Kits - "STREET & SHOW"
Part
Number |
400
- 455 Pontiac Blower Kits:
-
"STREET & SHOW" |
Price |
|
|
|
|
|
|
400 -
455 Pontiac 671
Blower Kits |
|
7661 |
455 Pontiac
671 Blower Kit, 1V, Satin Finish - 8mm |
$3,261.00 |
7662 |
455 Pontiac
671
Blower Kit, 2V, Satin Finish - 8mm |
$3,261.00 |
7663 |
455 Pontiac
671 Blower Kit, 3V, Satin Finish - 8mm |
$3,276.00 |
|
|
|
|
7667 |
455 Pontiac
671 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm |
$3,461.00 |
7668 |
455 Pontiac
671
Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm |
$3,461.00 |
7669 |
455 Pontiac
671
Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm |
$3,476.00 |
|
|
|
|
7673 |
455 Pontiac
671 Blower Kit, 1V, Complete Polished Kit - 8mm |
$3,576.00 |
7674 |
455 Pontiac
671
Blower Kit, 2V, Complete Polished Kit - 8mm |
$3,576.00 |
7675 |
455 Pontiac
671
Blower Kit, 3V, Complete Polished Kit - 8mm |
$3,591.00 |
|
|
|
|
|
400 -
455 Pontiac 871
Blower Kits |
|
7664 |
455 Pontiac
871 Blower Kit, 1V, Satin Finish - 8mm |
$3,641.00 |
7665 |
455 Pontiac
871
Blower Kit, 2V, Satin Finish - 8mm |
$3,641.00 |
7666 |
455 Pontiac
871 Blower Kit, 3V, Satin Finish - 8mm |
$3,656.00 |
|
|
|
|
7670 |
455 Pontiac
871 Blower Kit, 1V, Polished Kit - with Satin Manifold -
8mm |
$3,841.00 |
7671 |
455 Pontiac
871
Blower Kit, 2V, Polished Kit - with Satin Manifold - 8mm |
$3,841.00 |
7672 |
455 Pontiac
871
Blower Kit, 3V, Polished Kit - with Satin Manifold - 8mm |
$3,856.00 |
|
|
|
|
7676 |
455 Pontiac
871 Blower Kit, 1V, Complete Polished Kit - 8mm |
$3,956.00 |
7677 |
455 Pontiac
871
Blower Kit, 2V, Complete Polished Kit - 8mm |
$3,956.00 |
7678 |
455 Pontiac
871
Blower Kit, 3V, Complete Polished Kit - 8mm |
$3,971.00 |
|
|
|
|
|
|
|
|
|
| Back
to Top |
|
|

SUPERCHARGER
USA
(714)
578-8200
If you
have any questions, please feel free to contact us by phone or email
us, and Supercharger USA will be happy to assist you with forced
induction technology!
|
|
|
|